How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

I have a 1976 ford 460 withe a crank centering hole that

Customer Question

i have a 1976 ford 460 withe a crank centering hole that measures 1.8320 and the only converter that i can find has a pilot ot 1.8450 needles to say it won,t fit what is going on or what am i doing rong
JA: What year is your Pilot?
Customer: all the torque converters that i can find have the 1.84 and the original car that it came out of was a galaxi
JA: Do you have the torque specs?
Customer: not usure what you are asking for it is for a 1850 stall
JA: Are you fixing your Pilot yourself? What have you tried so far?
Customer: the hole in the crank in what it is my problem i cna't find a torqueconverter to fit they are all to big by .010
JA: Anything else you want the mechanic to know before I connect you?
Customer: I am putting this into a f250 pickup and the c6 has a shift kit in it and the engine is built for pulling
Submitted: 3 months ago.
Category: Ford
Expert:  kalamykid replied 3 months ago.

Is there a lip on the edge of the pilot hole in the crank?