How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 33028
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Have a 2012 Fusion. When the AC is on it will blow both hot

Customer Question

Have a 2012 Fusion. When the AC is on it will blow both hot for a few minutes then cold for a few minutes. I'm told the climate control head needs to be replaced. However I saw where the AC fuse can be taken out for 15 seconds, restart the car and let run for 3 minutes. Not sure the ladder is what I need. Help if you can.
JA: Most vehicles have two fuse panels. Do you know what they look like?
Customer: Thanks, Bill
JA: Are you fixing your Fusion yourself? What have you tried so far?
Customer: Yes
JA: Anything else you want the mechanic to know before I connect you?
Customer: Have not tried anything.
Submitted: 5 days ago.
Category: Ford
Expert:  Ron replied 5 days ago.

Hello. My name is ***** ***** I am happy to assist you today. Give me just a moment to review your post, and I'll be right back with the help you need.

Expert:  Ron replied 5 days ago.

The steps you have read will reset the system if in fact the blend door actuator needs to be calibrated. Do you have the steps to try this?

Customer: replied 5 days ago.
Expert:  Ron replied 5 days ago.

See them in the link below, its fairly simple to do and see if the system will reset.