How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike S. Your Own Question
Mike S.
Mike S., ASE Certified Technician
Category: Ford
Satisfied Customers: 6819
Experience:  ASE Certified Master Technician
20625509
Type Your Ford Question Here...
Mike S. is online now
A new question is answered every 9 seconds

I have a 1996 Ford Bronco. It has 355 stock ring gears in

Customer Question

I have a 1996 Ford Bronco. It has 355 stock ring gears in the front and rear axles. I am trying to find out what size larger gears swap out to in order to gain a lot more torque without loosing to much top end speed for the highway. I have 33's on the Bronco. The engine is a 351 Windsor and automatic trans. Can anyone help??? Thank you for your time!
Submitted: 2 months ago.
Category: Ford
Expert:  Mike S. replied 2 months ago.

Hi, I am Mike, welcome. I'm reviewing your question.

Expert:  Mike S. replied 2 months ago.

According to randy's ring and pinion wizard the next size is 3.73, then 3.90, then 4.11, then 4.30, 4.56 and so on.

https://www.ringpinion.com/DiffWizard.aspx

Expert:  Mike S. replied 1 month ago.

Did that answer your question? If so, kindly leave me a positive rating, so I get credit. After all, you have already made the deposit.