How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Scott W. Your Own Question
Scott W.
Scott W., Ford Technician
Category: Ford
Satisfied Customers: 3288
Experience:  28 yrs. experience as Ford ASE Master Technician. Accolades include being a 2005 Ford PTS Regional Finalist and 2006 ASE Ford National Technician.
26022388
Type Your Ford Question Here...
Scott W. is online now
A new question is answered every 9 seconds

No start i have replaced icp valve. ipr sensor fuel pump and

Customer Question

no start i have replaced icp valve. ipr sensor fuel pump and ficm computer
JA: Are you certain it's the fuel pressure sensor that's in need of attention? What about the fuel rail? Have you checked it yet?
Customer: i have replaced the ipr vavle. the icp valve, the fule pump and the ficm computer and still no start
JA: What is the model/year of your Ford?
Customer: 2003 F 250 6.0 diesel
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: yes i have replaced the ipr valve the icp sensor the fule pump and the ficm computer
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 2 months ago.
Category: Ford
Expert:  Scott W. replied 2 months ago.

Hello my name is ***** ***** there any codes stored in the computer, do you have a scan tool?

Customer: replied 2 months ago.
I do and they are no codes stored
Expert:  Scott W. replied 2 months ago.

Can you look at pid data?

Expert:  Scott W. replied 2 months ago.

Here is a data list in box 10, check all the pids while cranking to see which pid is not allowing the engine to start. Then letme know what you find, ask as many questions as needed, thanks Scott

Customer: replied 2 months ago.
It will be tomorrow before I can check it
Expert:  Scott W. replied 2 months ago.

Thats fine, I am online in the evenings.

Customer: replied 2 months ago.
Thanks I will let you know evening
Expert:  Scott W. replied 2 months ago.

Ok thank you