How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

2014 ford edge started blowing hot one one side, then cold

Customer Question

2014 ford edge started blowing hot one one side, then cold and hot on the other side ( Passenger/driver side) not both sides blowing hot, Freon line seems to be pretty darn cold, checked fuses, can you point me in the right directon to correct the problem
JA: Most vehicles have two fuse panels. Have you located both?
Customer: well there is one under the dash on driver side then one under hood on driver side
JA: Are you fixing your Edge yourself? What have you tried so far?
Customer: just check fuses and make sure Freon line was cold then came to computer
JA: Anything else you want the mechanic to know before I connect you?
Customer: is there some kind of flapper panel that opens between hot and cold that could be stuck open?
Submitted: 2 months ago.
Category: Ford
Expert:  EricFromCT replied 2 months ago.

Hi. On your Edge it is common for the blend door actuators to go bad. Causing erratic heat operation.

Customer: replied 2 months ago.
where is it located and how do you fix it
Expert:  EricFromCT replied 2 months ago.

Which side appears to be the one not following the heat setting?