How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask roy Your Own Question
roy
roy, import/domestic specialest
Category: Ford
Satisfied Customers: 4652
Experience:  ASE master tech for 40 years
3506196
Type Your Ford Question Here...
roy is online now
A new question is answered every 9 seconds

I have a 2007 f250 6.0 and have a map/baro sensor code, I

Customer Question

I have a 2007 f250 6.0 and have a map/baro sensor code, I have replaced both sensors with oem and the code is still there and my truck still runs poorly, what could this be.
Submitted: 3 months ago.
Category: Ford
Expert:  AMEDEE replied 3 months ago.

Hello and welcome!

My name is ***** ***** I can assist you with your question.

Expert:  AMEDEE replied 3 months ago.

Can I get the code stored in the computer?

Customer: replied 3 months ago.
P0107
Customer: replied 3 months ago.
The map sensor had 5.14 volts coming in and .12 volts going out
Expert:  AMEDEE replied 3 months ago.

I wish I could help.. but I dont have any info on this. I thought I was going to be able to point you in the right direction but unfortunately that is not the case. I will leave this open for other experts. Good luck!

Customer: replied 3 months ago.
Thank you
Expert:  roy replied 3 months ago.

good evening my name is ***** ***** I will assist

do you still need help???

Roy

Customer: replied 3 months ago.
3 weeks into this with no luck
Expert:  roy replied 3 months ago.

ok, check the connector as shown and give me your results

Roy

Customer: replied 3 months ago.
Will do, where would the ground be that I would be checking? Also Roy, will you be on line tomorrow
Expert:  roy replied 3 months ago.

look at the connector. use an ohmeter to verify the ground by taking the red lead to the connector and the black lead to the battery negative

yes until about 2 pm

Roy

Customer: replied 3 months ago.
Ok I will message you tomorrow
Expert:  roy replied 3 months ago.

please dont forget to rate me as it is the only way I get paid for my efforts

Roy

Customer: replied 3 months ago.
I'll give you a great rating just for trying to help me, but if u get me through this I'll send you a 100 dollars gift card to wherever you choose. I've been at those for 3 weeks and thrown so many parts at it at this piont I don't care what it cost as long gone as it gets fixed
Expert:  roy replied 3 months ago.

thanks. it sounds like you dealing with a wire harness issue here, not a parts failure

Roy

Expert:  roy replied 2 months ago.

what happened today???

Customer: replied 2 months ago.
Nothing actually, it was my son's bday and could not dig into my truck, but I will pick up today we're I left off
Expert:  roy replied 2 months ago.

ok

Related Ford Questions