How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

95 Explorer,replaced fuel pump (kit) now no power to fuel

Customer Question

95 Explorer,replaced fuel pump (kit) now no power to fuel pump relay. Have replaced all relays,fuses (related) all check good,checked inertia cut-out all check good.
JA: Is the power loss consistent, or does it fluctuate?
Customer: Always absolute zero output,(new battery)
JA: Are you fixing your Explorer yourself? What have you tried so far?
Customer: I am a retired ASE Certified Technician,so yes I am doing the repair. All that is in initial statement
JA: Anything else you want the mechanic to know before I connect you?
Customer: that is about it.
Submitted: 3 months ago.
Category: Ford
Expert:  Edward replied 3 months ago.

Hello and thanks for your question. My name is ***** ***** I will do all I can to help.

Expert:  Edward replied 3 months ago.

Do you have 12 volts at the inertia switch when cranking? or does it show zero?

Expert:  Edward replied 3 months ago.

You should have 12 volts on the PINK/BLACK wire when cranking at the inertia switch, it's a straight shot to the fuel pump from there.