How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Brakes dragging after master cylinder and power booster

Customer Question

brakes dragging after master cylinder and power booster being replaced
JA: How many miles are on the car? Are these the orignial brakes?
Customer: 105,000,I bought used,i would think these are newer pads but probably original calipers
JA: What is the model/year of your Ford?
Customer: 2008 ford edge
JA: Are you fixing your Edge yourself? What have you tried so far?
Customer: had power booster vacuum leak,replaced booster and master cylinder and bled whole system.test drove ok but after a little more driving they lock up
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 1 month ago.
Category: Ford
Expert:  Gary replied 1 month ago.

I am sorry for the long wait

do just the front or just the rears lock up when this happens ?

Customer: replied 1 month ago.
left front,right rear
Customer: replied 1 month ago.
are you there?
Customer: replied 1 month ago.
forget this !!! I can not wait for slow response,I am sorry.I hope I do not get charged for this
Expert:  Gary replied 1 month ago.

i am here i am sorry

Expert:  Gary replied 1 month ago.

did the new master make it better or worse or the same ?

Expert:  Gary replied 1 month ago.

was it doing this before the master was changed ? why was the master and booster changed to correct this issue or ?

Related Ford Questions