Have Ford Questions? Ask a Mechanic for Answers ASAP
Hello and welcome! My name isCustomerand I can assist you with your question. This condition is caused by a wiring issue between the PCM and the ignition coil or simply a bad driver in the PCM. I would start by checking the wiring going to the coil for opens, shorts or melted areas that can cause the coil to fire constantly causing it to burn up. If all checks out good, the PCM will need to be replaced and then programmed using the factory scanner.
I am glad I can help!
It has been a pleasure working with you. Please dont forget to honor your good faith deposit by rating my answer as "Excellent Service" for assisting you today.
Please let me know if you have any further questions.
You should see the rating system towards the bottom of the page.
Did you have any further questions?
Your welcome! Please dont forget to rate. You can always reply back even after you rate my answer. Have a great day!
Hello! It'sCustomerfrom just answer.
I am just checking in to see if you need any further assistance?
Let me know!