Ford Repair Questions? Ask a Mechanic for Answers ASAP
Hello, my name is***** and thanks for your question.
I usually use a trim tool remover, if you don't have one you can use a kitchen fork and bend the prongs outward just enough to clear the stem of the pushpin. If they feel like they are going to break then you can warm them with a hair drier slightly, this usually softens the plastic allowing the barbs to give a little easier.
If you are satisfied with your answer, please take a moment to rate my service as you see fit. Experts are not compensated without a positive rating. Providing a rating does not close the question, you can reply or ask additional questions without incurring further charges.