Have Ford Questions? Ask a Mechanic for Answers ASAP
Hi, I'm Chad ,Welcome To JustAnswer, I'm reviewing your question and I will be be posting a replay ASAP
what are you trying to reset , ?
oh man i m sorry,since no scanners available lets try this below procedure
Master reset Procedure
1- Disconnect Battery Cables ( Negative & Positive Cables ) if you cant reach them, just disconnect negative one
2- Hold cables Together for 20 secs ,then let go
3- Wait 10 minutes
4- Make sure all doors are closed
5- Reconnect battery Cables
6- Lock & unlock the vehicles using the key from driver door side (if you have a key fob with no blade key, just lock & unlock using the key fob buttons)7- Enter the vehicle and attempt to start
is there a red security light on flashing on dash or steady on when you attempt to start ?
ok can you do the disconnect ,might need a 8mm or 10 mm to disconnect battery
alarm triggered for sure ?
1 or 2 keys for it ?
the 2nd key will be useful in case the key you have went bad and not sending the rf signal necessary to allow start up
Sounds good , I m online till 12 pm tonight ,so let me know
if the second key does not work, you will need to have it towed and scan the anti theft module using a ford scanner or equivalent to see what failed in the anti theft system.
a hood switch, door switch, receiver module , antenna etc..
I m sorry I wish there is another way, now days the anitheft module has to send a signal to the pcm( engine computer to allow start up ) with out these 2 module seeing each other and several other perimeters have to be met to start and there is not like a fuse or relay that you can pull out to deactivate .