How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kevin Bourcier Your Own Question
Kevin Bourcier
Kevin Bourcier,
Category: Ford
Satisfied Customers: 117
Experience:  Owner/Technician at Max Air Mobile
83572702
Type Your Ford Question Here...
Kevin Bourcier is online now
A new question is answered every 9 seconds

2006 6.0 f250... wont start, but will turn over... no codes

Customer Question

2006 6.0 f250... wont start, but will turn over... no codes to scanner...it is getting fuel
JA: Has the vehicle turned into a gas hog? And how does it start -- same as usual?
Customer: it is diesel and it went from 15 to 12 miles per gallon
JA: Are you fixing your F250 yourself? What have you tried so far?
Customer: put it on the scanner to check for codes....snap on scanner.. no codes
JA: Anything else you want the mechanic to know before I connect you?
Customer: I checked to make sure it was getting fuel and it is
Submitted: 8 months ago.
Category: Ford
Expert:  Kevin Bourcier replied 8 months ago.

hello . I can assist you with this

Expert:  Kevin Bourcier replied 8 months ago.

okay . Can you erase the codes ? . And Can you key the y ignition switch 6 or 7 times then remove the top off the fuel filter ? Is there fuel in the filter ?

Expert:  Kevin Bourcier replied 8 months ago.

Hi . I am sorry . My computer is running slow and acting up . That reply was for another customer . I apolagize . I can help you with your issue .

Expert:  Kevin Bourcier replied 8 months ago.

hello are you still requiring assistance with your issue ?