How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike S. Your Own Question
Mike S.
Mike S., ASE Certified Technician
Category: Ford
Satisfied Customers: 6703
Experience:  ASE Certified Master Technician
Type Your Ford Question Here...
Mike S. is online now
A new question is answered every 9 seconds

My name is, i was installing an after market radio in my

Customer Question

Hi pearl, my name is ***** ***** was installing an after market radio in my 2000 ford expedition an i checked all my fuses an now my windows wont go down
JA: Have you located the fuse box? Have you checked the circuit?
Customer: No i have checked the circuit an wht is tht
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Yes i was hoping it was something simple tht i can fix myself. I changed 2 fuses tht were blown
JA: Anything else you think the mechanic should know?
Customer: No ma'am thts all i have tried
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Ford Mechanic about your situation and then connect you two.
Submitted: 3 months ago.
Category: Ford
Expert:  Mike S. replied 3 months ago.

I'll get the wiring diagram if you tell me which engine came in this and is it 4wd or rwd?

Customer: replied 3 months ago.
It's rear wheel drive an it has a 4.6liter
Expert:  Mike S. replied 3 months ago.

A quick look though reveals that there is only 1 fuse and 1 circuit breaker, both in the battery junction box, the circuit breaker 601 and the fuse 103.

Here is the wiring diagram,

Expert:  Mike S. replied 3 months ago.

Same wiring diagram for the 4.6.Check that fuse 103 and if it's not blown, try replacing that circuit breaker 601. If it still won't work, get yourself a multlimeter and prepare to test and get back to me.

Customer: replied 3 months ago.
Will do thanks
Expert:  Mike S. replied 3 months ago.

Was that fuse 103 ok or blown?