How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask cardoctor74 Your Own Question
cardoctor74, ASE Certified Technician
Category: Ford
Satisfied Customers: 25920
Experience:  Qualified to fix all makes and models
Type Your Ford Question Here...
cardoctor74 is online now
A new question is answered every 9 seconds

2013 escape engine fault service now displayed with rough

Customer Question

2013 escape engine fault service now displayed with rough run. DTC at dealer service does not show any code in memory for them to identify problem. My own research found TSB 13-12-12 NHTSA ID 10054363. Do you have cause to this issue?
Submitted: 3 months ago.
Category: Ford
Expert:  cardoctor74 replied 3 months ago.

Yes there are issues with the engine harness and they should know this .Most common at the throttle position sensor.Have them check that and bring this with you .

2013 FORD ESCAPE Technical Service Bulletin

HOME » F » FORD » ESCAPE » 2013 » 10054363

NHTSA Item Number:10054363

Service Bulletin #:TSB-13-12-12

Replacement #:

Vehicle/Equipment Make:FORD

Vehicle/Eqipment Model:ESCAPE

Model Year:2013

Mfg Component Code:110000 ELECTRICAL SYSTEM

Date of Bulletin:2013-11-28

Date Added:2014-01-15

Summary:FORD: DIAGNOSTIC TROUBLE CODE (DTC) P0106, P0236, FOR LOSS OF RPM, HESITATION, DIFFICULT TO START, CRANK NO START, RUNS ROUGH, LACK OF POWER AND ALSO A MESSAGE DISPLAYED-ENGINE FAULT SERVICE ENGINE NOW MAY BE CAUSED BY WIRING IN SIGNAL RET Hoped this helped.Please rate excellent service so I can get credit for my help thanks.Bonuses greatly appreciated.Im here if yo need any further assistance.