How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 35023
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

New 2016 ford E450, wrench light just came on, its all brand

Customer Question

new 2016 ford E450
JA: What is the model of your '16 Ford?
Customer: wrench light just came on
JA: How old is your battery? Have you checked the bulbs?
Customer: its all brand new
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: nothing,yet was trying to find out if there was a reset noticed a power drop pulling in
JA: Anything else you think the mechanic should know?
Customer: no
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Ford Mechanic about your situation and then connect you two.
Submitted: 11 months ago.
Category: Ford
Expert:  Ron replied 11 months ago.

Hello and thank you for your question,

The wrench light comes on when the computer sees a system fault and when this happens the computer system will set and store a fault code and or codes. In order to determine what cause the light to come on your need to have the system scanned and the fault code and or codes retrieved. You can reset the system by disconnecting the negative battery cable for a few minutes. If after doing so and the light returns then the system will need to be scanned and the fault code retrieved. Try the reset first and see if the problem clears. Post back if need be and we can work from there.