How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask roy Your Own Question
roy
roy, import/domestic specialest
Category: Ford
Satisfied Customers: 4652
Experience:  ASE master tech for 40 years
3506196
Type Your Ford Question Here...
roy is online now
A new question is answered every 9 seconds

I have a 1981 inline 6 f100 automatic 3 speed it sat a 2

Customer Question

I have a 1981 inline 6 f100 automatic 3 speed it sat for about a 2 years was parked running why does it go from 1st to 2nd at high rpm only and second to third shift fine?
Submitted: 5 months ago.
Category: Ford
Expert:  roy replied 5 months ago.

good evening my name is ***** ***** I will assist

from the sitting, the seals have become hard. they are not holding pressure for a nice shift.

I would change all the fluid including the torque converter and the filter. I would start there and drive it. if it does not get better, the seals will have to be replaced.

Roy

Expert:  roy replied 5 months ago.

are you there

Expert:  roy replied 5 months ago.

please dont forget to rate me as it is the only way I get paid for my efforts

Roy

Related Ford Questions