Ford Repair Questions? Ask a Mechanic for Answers ASAP
any engine light or codes?
No there are not.
how many miles? are the coils original? was it skipping prior to the plug change?
Just over 100k coils are not original and it was not skipping prior to changing the plugs
i would replace all the coils you can buy all 8 on amazon for 50 bucks
Did resistance check on all coils and they all check out over 0.66 ohms for stock coils is there any thing else that could be going on with it. It is bad hesitation at low rpms but when you get into hight rpms it straightens out.
is it a hesitation or a skip?
Honestly it seems like both gets worse when you disconnect one by one when it's running it has a slight popping noise all the time when it's in park neutral or drive
and still has not tripped a code?
No it has not
does your scan tool have a misfire counter?
What do you mean by that
can you watch misfire counts on your scan tool?
No I cannot
did you gap the plugs? did you install motor craft plugs?
Ngk iridiums gapped correctly
I would sill replace the coils...clean the throttle body and the maf...without watching misfire counts or codes its a guessing game