How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

I have a 2007 fusion and the a/c is blowing hot. i located

Customer Question

I have a 2007 fusion and the a/c is blowing hot. i located the low pressure port but when I check it is showing 120 psi and i was needing to now where the pressure release valve is
JA: Have you checked the Freon level? Have you checked the hoses?
Customer: yes
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: yes other than wanting to add coolant but not doing so bc of the pressure showing
JA: Anything else you think the mechanic should know?
Customer: not that i can thin of, the compressor is working and the fan blows just not cool air
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Ford Mechanic about your situation and then connect you two.
Submitted: 4 months ago.
Category: Ford
Expert:  Eric replied 4 months ago.


Was the compressor engaged and running when you took the pressure reading?

What is the high side pressure reading?

Why do you believe you need to release any refrigerant(release pressure)

Related Ford Questions