How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

I'm not getting power to the pcm : 94 ford ranger 3.0l

Customer Question

I'm not getting power to the pcm
JA: What is the model/year of your Ford?
Customer: 94 ford ranger 3.0l automatic
JA: What year is your Ranger?
Customer: 94
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: yes and I have replaced pcm, relay, fuse, ignition switch, distributor, ignition control modal, coil, and fuel pump
JA: How many miles are on the car? Has the car been starting normally?
Customer: exempt, it was running but died out and hasn't started sence
JA: Anything else you think the mechanic should know?
Customer: when the key is almost to the on position it powers up but if you turn it all the way it loses power like there is a short
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Ford Mechanic about your situation and then connect you two.
Submitted: 5 months ago.
Category: Ford
Expert:  Dan replied 5 months ago.

Hello, my name is***** pin and wire color at PCM are you testing for power?