How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Ford Tech -
Category: Ford
Satisfied Customers: 17948
Experience:  18+yrs experience. State Inspector & Ford Diagnostics/Repair
18617752
Type Your Ford Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

2009 Escape code B1342 : how reset? : just got code from

Customer Question

2009 Escape code B1342
JA: Have you scanned the code? Have you tried to reset it?
Customer: how reset?
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: just got code from AutoZone
JA: Anything else you think the mechanic should know?
Customer: no problem with brake operation
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Ford Mechanic about your situation and then connect you two.
Submitted: 5 months ago.
Category: Ford
Expert:  Ron Z. replied 5 months ago.

The B1342 is a fairly straight forward code pointing to an internal problem with the Electronic Brake Control Module. Check fuse #9 in the under-hood fuse box. If the fuse is good, then a scan-tool that can interact with the ABS System should be used to confirm, but more commonly, the Module is defective and will need to be replaced.

If you found this answer helpful, please help me and leave a rating using the "stars" at the top of the page or click 'accept'.
Rating or accepting my answer does not cost you extra. It allows me to be credited for this Q&A.

Expert:  Ron Z. replied 5 months ago.

..

Related Ford Questions