How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AMEDEE Your Own Question
AMEDEE
AMEDEE, FORD TECHNICIAN
Category: Ford
Satisfied Customers: 24387
Experience:  ASE CERTIFIED TECHNICIAN ADVANCED LEVEL SPECIALIST. Wisconsin certified emissions state inspector
279429
Type Your Ford Question Here...
AMEDEE is online now
A new question is answered every 9 seconds

RE: 2010 Ford Focus SE RE: Brake Caliper Guide Pins Can you

Customer Question

Hi,
RE: 2010 Ford Focus SE
RE: Brake Caliper Guide Pins
Can you tell me the correct position for the 2 long caliper Guide Pins?
One Guide Pin has a groove at the tip for a 1/4" rubber sleeve.
The other bolt has a long flat groove along the entire bolt length but does not have a rubber sleeve.
Which one goes in the top hole of the Caliper on the driver's side?
It would probably be easier for me to explain if I could email you a photo.
Thank you,
*** ******
Submitted: 7 months ago.
Category: Ford
Expert:  AMEDEE replied 7 months ago.

Hello and welcome! My name is ***** ***** I can assist you with your question. The LONG caliper pins go on TOP of each caliper

Related Ford Questions