How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

1998 ford tarus. V6. Where does quarter inch vacuum intake

Customer Question

1998 ford tarus. V6. Where does quarter inch vacuum intake behind ica and egr valve. Where does it end up?
Submitted: 7 months ago.
Category: Ford
Expert:  roy replied 7 months ago.
good evening my name is ***** ***** I will assist can you post a picture??? the egr originates at the intake and goes to the solenoid and then the valve. Roy
Customer: replied 7 months ago.
Right beside the pcv valve starts on intake
Expert:  roy replied 7 months ago.
does that reach over to the air filter hose to the throttle body.?? there is a nipple on that hose that goes to the intake Roy
Customer: replied 7 months ago.
Were looking
Expert:  roy replied 7 months ago.
ok
Customer: replied 7 months ago.
Throttle body has no nipple.
Customer: replied 7 months ago.
Can u call(###) ###-####? Please
Expert:  roy replied 7 months ago.
not the throttle body, the big rubber tube that from the throttle body to the air filter assembly. look all around the hose especially around the back of it
Customer: replied 7 months ago.
Call
Expert:  roy replied 7 months ago.
let me see if I can get a vacuum diagram of this for you I cannot see the number it is blocked. I will send a premium request for you for a phone call request Roy
Customer: replied 7 months ago.
(###) ###-####
Customer: replied 7 months ago.
$26
Expert:  roy replied 7 months ago.
I have no control over money. I only get a small portion of what you pay. is there a hose to the brake booster????
Customer: replied 7 months ago.
Yes
Expert:  roy replied 7 months ago.
the end behind the intake, where does it meet up??? is there a vacuum block that it goes to??? Roy
Customer: replied 7 months ago.
Call me or text me your #
Expert:  roy replied 7 months ago.
I am sorry, I dont give my number out for free.
Expert:  roy replied 7 months ago.
take a look at the diagram
Customer: replied 7 months ago.
Where PCb valve lines starts, this line is behind it
Expert:  roy replied 7 months ago.
ok, so it goes to the upper or lower intake???it turns in the back and goes where??
Customer: replied 7 months ago.
Upper. Right beside PCB valve vacuum port
Expert:  roy replied 7 months ago.
take a look for this evap valve under the hood. it takes the line the same size as this for the evap system when you start it, it has vacuum at the end of the line??? Roy
Customer: replied 7 months ago.
Green plug going into round box?
Expert:  roy replied 7 months ago.
does the end of the hose have that kind of connection as in the picture??? yes, it has an electrical connector with 2 wires. it should have 2 vacuum lines. one from the intake and the other goes back to the evap cannister at the back of the car Roy
Customer: replied 7 months ago.
Yes sits behind green
Expert:  roy replied 7 months ago.
ok, does the hose fit on it
Customer: replied 7 months ago.
This hose matches nothing
Expert:  roy replied 7 months ago.
the size indicates either brake booster, pcv valve, evap or air filter line. hook the one end back up and run the hose around the engine compartment. whatever it hooks to should show by moving it around. I wish I was there to look at it myself.

Related Ford Questions