How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

This is a continuing from yesterday. My car wouldnt start we

Customer Question

This is a continuing from yesterday. My car wouldnt start we determined it was the crank sensor or wiring, Upon investigation I found a lot of oil on the connectors to the sensor. I replaced and the car started and I thought the problem solved. Now it will start but it stalls when the rpms get low and the check engine light is always on.
Submitted: 6 months ago.
Category: Ford
Expert:  Ron replied 6 months ago.
Hello and thank you for you question,Can you scan the computer system and see what the fault code and or codes are that should be setting when the light is coming on and post back with them ?
Customer: replied 6 months ago.
yes I will
Expert:  Ron replied 6 months ago.
Okay let me know and we can work from there.

Related Ford Questions