How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask EricFromCT Your Own Question
EricFromCT, Ford Technician
Category: Ford
Satisfied Customers: 3537
Experience:  20 years dealership exp., ASE A1-A9 L1 L2, Ford Lincoln Mercury Senior Master, Diesel Certified
Type Your Ford Question Here...
EricFromCT is online now
A new question is answered every 9 seconds

2011 f450 superduty: 2011 f450 6.7 power stroke I have removed

Customer Question

2011 f450 6.7 power stroke I have removed all mounting bolts but the cables I can't get enough clearence from the motor mount I lack about one half an inch to remove it what is secret
Submitted: 10 months ago.
Category: Ford
Expert:  EricFromCT replied 10 months ago.
Hi. What side engine mount are you trying to replace?
Customer: replied 10 months ago.
I am replacing the starter motor there isn't enough cleaence to get the starter out
Expert:  EricFromCT replied 10 months ago.
Oh. THere is enough room for the starter. You need to remove the inner fender splash shield, then the starter comes out over the frame near the block heater cord.

Related Ford Questions