How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sean Your Own Question
sean, Ford Technician
Category: Ford
Satisfied Customers: 3104
Experience:  Certified Ford master technician since 2001
Type Your Ford Question Here...
sean is online now
A new question is answered every 9 seconds

Ford Ranger 3.0l TDCi: Can you give me the torque settings

Customer Question

Can you give me the torque settings for a Ford Ranger 3.0l TDCi 2008 model? Thanks.
Submitted: 6 months ago.
Category: Ford
Expert:  sean replied 6 months ago.
Hello, can you tell me which torque settings you require?Let me know and I'll reply as soon as I'm able to.Thanks.
Customer: replied 6 months ago.
Hi SeanCylinder head torque settings please
Expert:  sean replied 6 months ago.
Hello again,I have attached a diagram showing the order and the torque settings for the cylinder head although the second, third and fourth stages are degrees. The two bolts marked "A" are tightened to 19 Nm.Let me know if you need further assistance.Best regards,Sean.
Customer: replied 6 months ago.
Thanks Sean
Expert:  sean replied 6 months ago.
No problem.Best wishes,Sean.