How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Your Own Question
Matt, Engineer
Category: Ford
Satisfied Customers: 20396
Experience:  BEng hons Mech engineering, in auto industry 22 years
Type Your Ford Question Here...
Matt is online now
A new question is answered every 9 seconds

1987 ranger 2.0 nospark, truck want start no fire at plugs

Customer Question

1987 ranger 2.0 nospark
JA: Tell me a bit more about what's going on so he can help you best.
Customer: truck want start no fire at plugs cap orcoil
JA: Are you hoping to fix this yourself?
Customer: yes
JA: Great! What have you tried so far?
Customer: changed coil cap roter and ignition box
JA: Is there anything else important you think the Ford Mechanic should know about your Ford?
Customer: no
JA: Our top Ford Mechanic is ready to take your case. Just pay the $5 fully refundable deposit and I'll fill the Ford Mechanic in on everything we've discussed. You can go back and forth with the Ford Mechanic until you're 100% satisfied. We guarantee it.
Submitted: 7 months ago.
Category: Ford
Expert:  Matt replied 7 months ago.


as the next step I'd use a meter to check if you have 12V at the coil post and if you do then check that the main engine earth strap / wire is tightly connected, in good condition and not corroded

also check that the ignition box also has 12V with the ignition on ( but engine off)

Related Ford Questions