How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask James Your Own Question
James
James, Ford Technician
Category: Ford
Satisfied Customers: 3588
Experience:  Ford Senior Master Tech, Ford gas and diesel expert, ASE Certified
74859263
Type Your Ford Question Here...
James is online now
A new question is answered every 9 seconds

P1000 obd systems readiness test not complete P120f fuel

Customer Question

P1000 obd systems readiness test not complete
P120f fuel pressure regulator excessive variation
P2289 injector control pressure too high
Submitted: 8 months ago.
Category: Ford
Expert:  James replied 8 months ago.

Hello, is the vehicle running at all?

Customer: replied 8 months ago.
revs up when I put it in park then runs rough. I cleared codes and it seems to be running fine now. any thoughts on how i get the problem to duplicate so i can trouble shoot?
Expert:  James replied 8 months ago.

Based off of the codes you have I would suspect a faulty fuel rail pressure sensor. The FRP sensor is a common failure point and can make the engine run rough. To duplicate you can monitor the FRP voltage. With the key on engine off it should read .49v. When it runs rough monitor FRP it will likely be a very erdratic reading.

Customer: replied 8 months ago.
Where is the FRP located?
Expert:  James replied 8 months ago.

The FRP is located under the passenger side valve cover.

Related Ford Questions