How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Ford
Satisfied Customers: 21604
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your Ford Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Its ***** ***** im in the uk ok 2008 mustang imported and i

Customer Question

hi its ***** *****
JA: Thanks. Can you give me any more details about your issue?
Customer: hi im in the uk ok 2008 mustang imported and i wired in gt lights but as i fitted them i put a wire the wrong way round and it sparked now no headlights yurn signal at the front
JA: OK got it. Last thing — Ford Mechanics generally expect a deposit of about $28 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 9 months ago.
Category: Ford
Customer: replied 9 months ago.
all i did was conect the wiring gt fog lamp loom to fuse box power ran the long cable to the light switch as i pulled out the light switch a wire came off the fog switch when i reattached i think i put on wrong terminal and was a small spark now no headlights high beam or front turn signals and when engine it running if you turn lights on or flash main beam it stops the engine running
Customer: replied 9 months ago.
is there a fuse or relay working with lights plus turn signal??
Expert:  sprinkles08 replied 9 months ago.

Hello and welcome to JustAnswer!

If you saw a spark and lights didn't work after that then odds are you blew a fuse but it's possible that module damage was done. The first thing should be done is check fuses.

Check fuses F50, F59, F63, F67, F54 and F55. Odds are one or more of these is blown.

Related Ford Questions