How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

I am getting the following code on my G3 bully dog

Customer Question

i am getting the following code on my G3 bully dog programmer P1211 unknown DTC Erase DTC 1 DTC found It is in a 2003 Ford F350 7.3 Powerstroke
Submitted: 1 year ago.
Category: Ford
Expert:  RJ replied 1 year ago.

The 1211 is set when the engine computer recognizes the injection control pressure is out of range. Does the engine run ?

Expert:  RJ replied 1 year ago.

I would first advise to verify the correct engine oil level to confirm that enough oil is present for the injection pump. Let me know what u find.