How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Corey,. 1997 F150 w 4.6 automatic. Missing at under a load

Customer Question

Corey, Hi Tim. 1997 F150 w 4.6 automatic. Missing at under a load and hard acceleration. Replaced: Plugs (motorcraft), wires, MAF, coils, fuel filter, fuel pump, cleaned out broken catalytic converters, cleaned injectors. No Codes, still the same 120 thousand miles.
JA: Thanks. Can you give me any more details about your issue?
Customer: I have checked all the connectors, wiggle and visual. All new filters. Runs fine, starts fine, unless you go harder on the pedal, starts missing. Feather the pedal will run up to 60-65 no problem. Try to keep the same speed up a hill starts cutting out.
JA: OK got it. Last thing — Ford Mechanics generally expect a deposit of about $28 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 9 months ago.
Category: Ford
Expert:  Tim Mohr replied 9 months ago.

Hi, my name is ***** ***** you just using a code reader, or do you have a scanner that reads data?

Customer: replied 9 months ago.
no reader or scanner
Customer: replied 9 months ago.
Are you there? If I had an idea where to look next that would be helpful.
Expert:  Tim Mohr replied 9 months ago.

if you dont have a scanner or code reader, then how do you know there are no codes?

Related Ford Questions