How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, ASE Certified Technician
Category: Ford
Satisfied Customers: 745
Experience:  Senior Technician
84449473
Type Your Ford Question Here...
Gary is online now
A new question is answered every 9 seconds

Will 471 blower work on 429 ford engine bored to 60 over

Customer Question

will 471 blower work on 429 ford engine bored to 60 over with all new parts. has crane cam 312 lift 412 der. roller rockers. block shaved 1th heads 2ths.
Submitted: 10 months ago.
Category: Ford
Expert:  Gary replied 10 months ago.

Hi Ron,

The 4/71 is a little small for your engine. A 6/71 would be more suitable.

Can you list your cam specs and compression ratio please?

Are your carbs just Holley 1850s, 600 vac sec?

Gary

Expert:  Gary replied 10 months ago.

Hi Ron,

I hope I was of some assistance to you.

Personally I would run a pair Edelbrock or Carter AFBs.

Way easier to tune than inline Holley 600s.

Regards

Gary