How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

I have a 1990 Ford explorer 2 door with automatic

Customer Question

I have a 1990 Ford explorer 2 door with automatic transmission just replaced the motor by a shop and now I have no reverse when I had reverse before throwing timing chain and was told motor needs replaced
Submitted: 1 year ago.
Category: Ford
Customer: replied 1 year ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  Eric replied 1 year ago.

Hi,

First, is it a 2000 or a 1990 as you have both years listed?

So there was no reverse on the day the engine was installed and cranked, correct?

Or did it lose reverse a day, two days, several days later?

Please remember that I am not there and unless I have all the details and facts, I cannot give accurate answers

Customer: replied 1 year ago.
My phone number is(###) ###-####not 7784
Customer: replied 1 year ago.
It's a 2000 explorer
Customer: replied 1 year ago.
I have $33.00 just got taken from my credit card
Customer: replied 1 year ago.
It had reverse before the motor change
Customer: replied 1 year ago.
Oh so you lied about the 30 minute response time
Expert:  Joe Barfield replied 1 year ago.

Hi , Ill Check with you later Again Sorry no one called you....I just found out.....

Expert:  Joe Barfield replied 1 year ago.

none

Expert:  HDGENE replied 1 year ago.

Hello, Ill assist you if I can. So you had an engine failure and had reverse gear prior and now the engine has been replaced and have only no reverse at all? It just revs in neutral? All other forward gears are ok? No warning lights are on or codes stored? Trans fluid level is full and correct and doesnt smell burnt?