How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

I have a Ford f550 super duty. The truck won't start I have

Customer Question

I have a Ford f550 super duty. The truck won't start I have no pringle and all lights on the dash. Also has a u0100 code. 6.8 litre gas engine v10
Submitted: 11 months ago.
Category: Ford
Expert:  Wayne Crawford replied 11 months ago.

Hello. My name is ***** ***** I will be helping you today.

Are you saying all the warning lights are lit up and stay lit up? And no light on the gear indicator?

Customer: replied 11 months ago.
Customer: replied 11 months ago.
No communication with the pcm or brake control module. No start also
Expert:  Wayne Crawford replied 11 months ago.

Does it crank and not start or not even crank?

Customer: replied 11 months ago.
No crank
Expert:  Wayne Crawford replied 11 months ago.

CAn you communicate with the body control module? If so check for codes in there.

Customer: replied 11 months ago.
The code in the bcm is u0100
Expert:  Wayne Crawford replied 11 months ago.

Thats the only code in there>?

Expert:  Wayne Crawford replied 11 months ago.

Actually I am going to have to opt out on this. I dont have 2015 wiring diagrams on the 550 gas engine yet. Hopefully someone else will come along soon that has access to the proper diagrams. In the meanwhile I would start by checking every fuse in the truck with a multimeter set on OHMS Or a fuse tester. My hunch says its probably a bad fuse.

Expert:  Pete replied 11 months ago.

Hi my name is ***** ***** I will be happy to assist with this today.In some cases I may need more info to assist better.I apologize for any delay.

Do you still need help with this here?

Let me know so we can continue,thanks Pete.

Related Ford Questions