How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Mohr Your Own Question
Tim Mohr
Tim Mohr, ASE MASTER TECH
Category: Ford
Satisfied Customers: 15222
Experience:  30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL
17454363
Type Your Ford Question Here...
Tim Mohr is online now
A new question is answered every 9 seconds

Are still there

Customer Question

Hey tim are still there
Submitted: 1 year ago.
Category: Ford
Expert:  Tim Mohr replied 1 year ago.

Yes, I am here?

Customer: replied 1 year ago.
on that orange wire u said .. is that the pure orange? because there is a orange with white stripe that has 12 volts
Customer: replied 1 year ago.
I put the old module in and it worked for a min .. now back to the same code
Customer: replied 1 year ago.
when I put the old module it looked like I had 9 volts on the solid orange but now nothing..
Expert:  Tim Mohr replied 1 year ago.

nO, IT IS A SOLID ORANGE WIRE, it is on the pin 5 of the 3rd conneor at the module, it is on pin 2 of the shift motor 6 pin connector

Customer: replied 1 year ago.
ok.. voltage is gone again on the solid orange.. talked to ford dealer and they said now the module needs to get programed
Expert:  Tim Mohr replied 1 year ago.

Yes, they do, have the new module programmed, and you should be good to go,Tim