How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jared D Your Own Question
Jared D
Jared D, ASE Certified Technician
Category: Ford
Satisfied Customers: 1334
Experience:  Shop Supervisor at County Fleet
62275574
Type Your Ford Question Here...
Jared D is online now
A new question is answered every 9 seconds

How do I take the blower motor out of a 2012 Ford Focus? I

Customer Question

How do I take the blower motor out of a 2012
Ford Focus? I can not find any thing on the Internet.
Submitted: 1 year ago.
Category: Ford
Expert:  AZTechBrian replied 1 year ago.

It is located on the passenger side under the dash to the far right. Please let me know if the attachment here helps you. https://www.dropbox.com/s/o57w38732ep74tm/blower%20motor.jpg?dl=0

Customer: replied 1 year ago.
This is a 2012 Ford Focus. It is not like the older Ford Focus that was in the glove box. It is behind air conditioner box against the firewall. I can't turn blower motor to get out. Only thing I could find was a Hayes book. How do I send a pic of it?
Expert:  AZTechBrian replied 1 year ago.

Alright. Sorry about that. That's all the information I have. Not sure why my alldata doesn't give an updated procedure. I will opt out and hopefully somebody here has the solution.

Expert:  Jared D replied 1 year ago.

Hi, new expert here.

Does your vehicle have dual automatic temp control or manual control?

Expert:  Jared D replied 1 year ago.

The procedures are very similar, but I'll send both anyways.

This is not an easy replacement.

Expert:  Jared D replied 1 year ago.

I just wanted to see if you need any additional info. Please don't forget to give a positive rating if I have been of some assistance.

Thanks!

Expert:  Jared D replied 1 year ago.

I just wanted to check in and see if you needed any additional info.

Customer: replied 1 year ago.
Jared,
Got faulty blower out. Have new in place but am having difficulty turning to tighten into place even with tab depressed. Is there a special tool required? Thanks.
Expert:  Jared D replied 1 year ago.

No, not that I know of. It should twist into place. Is it a factory ford blower motor? I think the only thing you can do is make sure it is exactly the same. There must be some kind of piece of plastic in the blower housing that wasn't molded right or something.

Expert:  Jared D replied 1 year ago.

I just wanted to see if you need more help. Please don't forget to rate.

Expert:  Jared D replied 1 year ago.

Let me know if you need any additional info.

Please don't forget to rate. They don't pay us if we don't get a positive rating.

Related Ford Questions