How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Ford
Satisfied Customers: 21601
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your Ford Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

4x4 code p1812 tried new switch and new 4x4 module light

Customer Question

4x4 code p1812 tried new switch and new 4x4 module light still flashes and code still there
Submitted: 1 year ago.
Category: Ford
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

This code is for the transfer case mode select switch circuit. There are only a few causes for this and assuming the replacement parts are good, the only thing left is wiring. This code sets when voltage on the switch signal circuit is high. This could be a short to power on the signal wire, an open ground to the switch, or an open signal wire. Make sure the switch ground is good, if ok then move to testing the white/brown wire for a short to power and for continuity between the switch and module.

Related Ford Questions