How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask 6Bucs Your Own Question
6Bucs
6Bucs, Ford Senior Master
Category: Ford
Satisfied Customers: 872
Experience:  Ford senior master tech, 18 years experience.
63005990
Type Your Ford Question Here...
6Bucs is online now
A new question is answered every 9 seconds

Im having a crank no start problem? 2006 F350 P0WER

Customer Question

hi im having a crank no start problem? 2006 F350 P0WER STROKE.my psi is well over 500,FICM IS AT 48.5,AND IPR IS UNDER 15..The truck tries to start but want stay running.cant figure the problem?
Submitted: 1 year ago.
Category: Ford
Expert:  6Bucs replied 1 year ago.

Hello and welcome to Just Answer. My name is James.

Are there any codes in the processor?

Have you been able to check fuel pressure?

James

Customer: replied 1 year ago.
Fuel bowl filling up, but not quite sure how to check fuel pressure
Customer: replied 1 year ago.
I have 1 code p2285. Researched tells me the icp sensor..replaced with new one..what else can i check concerning code p2285?
Expert:  6Bucs replied 1 year ago.

Low fuel pressure can affect the ICP reading. I would wait on replacing the sensor for now. You can check the fuel pressure on the driver's side frame rail at the HFCM (heated fuel control module) outlet with a fuel pressure gauge, if you have one available to you. With the symptom you describe, low fuel pressure sounds likely at this point. We need to verify the fuel pressure reading at this point.

James

Customer: replied 1 year ago.
Ok going purchase a fuel pressure gauge. Icp sensor been replaced already
Expert:  6Bucs replied 1 year ago.

Ok sounds good.

Customer: replied 1 year ago.
Is it a additional 18 $ to talk live
Customer: replied 1 year ago.
The question never was answered, im still waiting on fuel pressure kit..but i see the funds was taken without receiving A answer
Customer: replied 1 year ago.
The code is p2285 truck wont start but fuel pressure is at 45
Expert:  6Bucs replied 1 year ago.

I'm not familiar with your scanner. Can it read live data?

Customer: replied 1 year ago.
its a scan gauge 2
Expert:  6Bucs replied 1 year ago.

Okay. Lets back up a sec. Was the p2285 code there all along, or did it come up after you made the repairs? Next, When cranking, can you please check the sync pid to see if it shows yes or no?

Customer: replied 1 year ago.
Made repairs before i purchased scan gauge so i couldn't tell you if the code was before or after.at work now i will check sync pids when i get home
Expert:  6Bucs replied 1 year ago.

Ok. I know this forum can be tedious, but stick with me and we will get your truck running.