How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Ford
Satisfied Customers: 18450
Experience:  ASE Master Tech 15+ Years
13574682
Type Your Ford Question Here...
George H. is online now
A new question is answered every 9 seconds

I'm trying to set the timing. My repair manual says to

Customer Question

I'm trying to set the timing. My repair manual says to unplug the single wire connector attached to the ignition module wire harness. Under the hood a sticker on the fan shroud reads to disconnect the in spout line connector. I can't find either one.
Submitted: 1 year ago.
Category: Ford
Expert:  George H. replied 1 year ago.

Hello I will help you with your question,

Which engine do you have? 3.8L?

Let me know and I will try to get you a location for the connector

Thank you