How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike S. Your Own Question
Mike S.
Mike S., ASE Certified Technician
Category: Ford
Satisfied Customers: 6813
Experience:  ASE Certified Master Technician
20625509
Type Your Ford Question Here...
Mike S. is online now
A new question is answered every 9 seconds

I have a 1998 4x4 ford,I put new brakes on the truck and

Customer Question

I have a 1998 4x4 ford,I put new brakes on the truck and found out that the master cylinder was messed up and replaced it The brakes were still not wright and found out the vacuum thingy was also bad. I bled the brakes and the had good pressure. After bleeding the brakes I turned on the ignition switch to start the truck and the brake pedal softly went down to the floor. The brake pedal only goes to the floor only with the ignition switch in the on position
Submitted: 1 year ago.
Category: Ford
Expert:  Mike S. replied 1 year ago.

What model is this and what engine is in it? Are you saying the brake pedal goes to the floor with the key on run and engine running or not running?

Customer: replied 1 year ago.
not running and 7.3 turbo diesel
Expert:  Mike S. replied 1 year ago.

What model?