How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 33418
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

95 ford probe has no spark after new distributer installed

Customer Question

95 ford probe has no spark after new distributer installed
Submitted: 1 year ago.
Category: Ford
Expert:  Ron replied 1 year ago.
Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
The lack of spark can be caused by any of the following,
Crankshaft Position (CKP) Sensor
Crankshaft Position (CKP) Sensor Circuit
Crankshaft Position (CKP) Sensor Connector
Distributor
Distributor Circuit
Distributor Connector
In order to determine what is failing you are going to need to do some testing, I have enclosed the steps in the link below, copy and paste the link to your browser to open and view them.
https://dl.dropboxusercontent.com/u/104923897/No%20spark%20Aug%2020.pdf