How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

I have a 2010 E-450 with a 6.8 gas engine, problem is when i

Customer Question

hi Steve i have a 2010 E-450 with a 6.8 gas engine, problem is when i crank it it want start, so we changed the fuel pump and that was not it. i have power to the pump but it will not run and if you hot wire it it will what might you think
Submitted: 1 year ago.
Category: Ford
Expert:  Chris (aka- Moose) replied 1 year ago.

When the pump is hotwired are you just supplying power or ground or both?

Will it start and run when hotwired?

Related Ford Questions