How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Ford f250 diesel 7.3: 1991 ford f250 auto 7,3 replaced torque

Customer Question

1991 ford f250 auto 7,3 replaced torque converter and pump drive for 15 minutes or so trans light starts blinking again
Submitted: 1 year ago.
Category: Ford
Expert:  HDGENE replied 1 year ago.
Hello, what prompted you to replace the oil pump and convertor, what trans codes did you have before and now, are they the same?
Customer: replied 1 year ago.
trans was shifting hard also replaced tach sending unit no real codes to speak of better codes after 1996 yr all that helped but after driving about 20 minutes light starts to blink again
Expert:  HDGENE replied 1 year ago.
well if the light is blinking it is setting a code, need to know what they are, fipl problem if its an IDI diesel, tcc solenoid etc.

Related Ford Questions