How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kenny Z. Your Own Question
Kenny Z.
Kenny Z., Ford Senior Master Tech
Category: Ford
Satisfied Customers: 5315
Experience:  Auto Trans, Drivability and Electrical Specialist
9600325
Type Your Ford Question Here...
Kenny Z. is online now
A new question is answered every 9 seconds

Ford explorer: my 2005 Ford Explorer Eddie Bower V6 is getting

Customer Question

my 2005 Ford Explorer Eddie Bower V6 is getting codes P606-p0320-p2106 .
Submitted: 1 year ago.
Category: Ford
Customer: replied 1 year ago.
This vehicle will crank after a while but continues to shut down with safety code and low oil pressure. could it be the Ignition/distributor sensor? if so, is it located at the transmission?
Expert:  Kenny Z. replied 1 year ago.
Hello my name is***** and thanks for your question.
If P0606 keeps returning, this is indicating internal powertrain control module (PCM) failure.
Customer: replied 1 year ago.
This is just just one of many things that I have pulled up. What is the fix?
Expert:  Kenny Z. replied 1 year ago.
PCM replacement
Expert:  Kenny Z. replied 1 year ago.
If you need more help, please use the reply tab to continue our conversation. If you do not require further assistance, kindly rate my service as you see fit. Rating does not close the question if you have follow up questions. Thanks!