How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Mohr Your Own Question
Tim Mohr
Tim Mohr, ASE MASTER TECH
Category: Ford
Satisfied Customers: 15121
Experience:  30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL
17454363
Type Your Ford Question Here...
Tim Mohr is online now
A new question is answered every 9 seconds

Ford F150 Pickup 4x4: I just drove through high water and the

Customer Question

I just drove through high water and the wrench light and the yellow engine light came on. The engine keeps stalling out and I have to press on the gas to keep it running and it is running rough at that.
Submitted: 1 year ago.
Category: Ford
Expert:  Tim Mohr replied 1 year ago.
Hi, my nqame is Tim, does the check engine flash when its running rough?
Customer: replied 1 year ago.
The wrench comes off and on and the check engine light is staying on
Expert:  Tim Mohr replied 1 year ago.
Ok, you most likely got water onto the coils, and this will cause a missfire and the lights, first thing to do id to remve each coil off the spark plugs and blow compressd air in the tubes and dry them out, also you need to have the codes read, this would verify if its a missfire causing the lights and on which cylinders,Tim