How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask A. Penland Your Own Question
A. Penland
A. Penland, Ford Senior Master Technician, ASE
Category: Ford
Satisfied Customers: 6429
Experience:  ASE Master Certified, ASE Advanced Gasoline Engine Performance
14865528
Type Your Ford Question Here...
A. Penland is online now
A new question is answered every 9 seconds

Ford E150: 2005 E150 remotes won't program; new remotes new

Customer Question

2005 E150 remotes won't program; new remotes new batts. After 8 cycles of ignition key, doors lock/unlock. Then remotes fail to program.
Submitted: 1 year ago.
Category: Ford
Expert:  A. Penland replied 1 year ago.
Hello and thanks for using JustAnswer.I will try my best to help you with your question.
If the original remotes stopped working and if new batteries and new remotes still do not, but the door locks do cycle when the key is cycled into programming mode, then the problem is the VSM (Vehicle Security Module under the dash on the passenger side behind the kick panel slightly upward.