How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Crawford Your Own Question
Wayne Crawford
Wayne Crawford, Shop Owner
Category: Ford
Satisfied Customers: 4015
Experience:  General Repair Shop Owner
66997337
Type Your Ford Question Here...
Wayne Crawford is online now
A new question is answered every 9 seconds

My 2002 F250 V10 would not start today...I jumped the battery and it s

Customer Question

My 2002 F250 V10 would not start today...I jumped the battery and it started but the gauges and the power windows would not work
I am wondering if it a fusible link or could jst be a fuse
Submitted: 1 year ago.
Category: Ford
Expert:  Wayne Crawford replied 1 year ago.
Hello. My name is ***** ***** I will be helping you today.It could be a fuse. If it is it will be either #33 15A, #45 10A, #35 10A, or #41 10A in the interior fuse panel. Check those and replace any bad ones and recheck it and let me know the results and we can move on if needed. THanks
Customer: replied 1 year ago.
I'll check now
Expert:  Wayne Crawford replied 1 year ago.
Alright. Take your time. Ill be standing by.
Customer: replied 1 year ago.
All of those fuses were fine
Expert:  Wayne Crawford replied 1 year ago.
And do they all have battery voltage to them?
Customer: replied 1 year ago.
How do I check that
Expert:  Wayne Crawford replied 1 year ago.
If you have a volt meter set it to DC Volts and stick the red probe in the little hole in the top of the fuse and touch the black probe to a good ground (unpainted bolt or something)
Customer: replied 1 year ago.
I don't have one here I left my tools at my jobsite can I check back in the morning
Expert:  Wayne Crawford replied 1 year ago.
Yep. Just check them all for battery voltage with the key on and let me know if any are missing it. If not we will figure out where to check next. Probably the back of the cluster. If its not a fuse its probably a bad cluster but we need to verify the cluster has all of its power and ground circuits in tact before ruling it bad.
Customer: replied 1 year ago.
Hello Wayne... I had one of my workers call me and he told me to reset my computer by putting the key in and tu\rning it from accessory to off 3 times and then start it and it worked...
do I get a refund.
Expert:  Wayne Crawford replied 1 year ago.
Yeah I will send your question to customer service to request a refund. Thanks