How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Windstar, ford: 2002 Ford Windstar. Rear engine/tranny

Customer Question

2002 Ford Windstar. Rear engine/tranny mount. I need to replace it.
My Questiion: HOW DO I REMOVE THE UPPER NUT ? I have a good set of tools, 3/4, 3/8 & 1/2" drives. I have air tools.
Can you tell me how to remove the upper nut............without a special tool ?
I have plenty of jacks, frame stands, etc. to do the job. THAT UPPER NUT HAS ME STUMPED.
If there is no way that I can remove that nut, then there is no need to proceed.
Vern
Submitted: 1 year ago.
Category: Ford
Expert:  EricFromCT replied 1 year ago.
Hi. You are talking about the mount on the rear of the passenger side?