How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Ford
Satisfied Customers: 18592
Experience:  ASE Master Tech 15+ Years
13574682
Type Your Ford Question Here...
George H. is online now
A new question is answered every 9 seconds

How to replace cabin air filter on 2001 ford e150

Customer Question

how to replace cabin air filter on 2001 ford e150
Submitted: 1 year ago.
Category: Ford
Expert:  George H. replied 1 year ago.
Hello I will help you with your question,
This vehicle is not equipped with a cabin air filter. If you have a musty smell remove the blower motor, vacuum the face of the AC evaporator core and foam it with coil cleaner to get the smell out.
Please let me know how I can help you with your question
Thank you
Customer: replied 1 year ago.
weak air flow coming out of vents. how to remove blower motor?
Expert:  George H. replied 1 year ago.
That may be a buildup on the face of the evaporator.
https://dl.dropboxusercontent.com/u/26725849/blow.pdf
Copy and paste that link into a new browser tab and let m e know how I can help you with this
Thank you
Customer: replied 1 year ago.
can't be done drier in way. I removed bolts holding drier and it doesn't move enough.
Customer: replied 1 year ago.
and I removed screws holding ac lines
Expert:  George H. replied 1 year ago.
That is the problem, you need to move the accumulator out of the way which means recovering and recharging the system when you have AC.
Please let me know how I can help you with your question
Thank you
Customer: replied 1 year ago.
ok thanks
Expert:  George H. replied 1 year ago.
If you have questions please let me know, you might be able to remove the blower resistor and get a peak inside but to do any cleaning if needed you have to get the motor out. Let me know how I can help Thank you