How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Crawford Your Own Question
Wayne Crawford
Wayne Crawford, Shop Owner
Category: Ford
Satisfied Customers: 4012
Experience:  General Repair Shop Owner
66997337
Type Your Ford Question Here...
Wayne Crawford is online now
A new question is answered every 9 seconds

2007 ford van e250 how do you program key fob

Customer Question

2007 ford van e250 how do you program key fob
Submitted: 1 year ago.
Category: Ford
Expert:  Wayne Crawford replied 1 year ago.
Hello. My name is ***** ***** I will be helping you today.Remote Keyless Entry (RKE) Transmitter Programming NOTICE: All remote keyless entry (RKE) transmitters must be programmed at the same time.Before entering the program mode, the vehicle must be electronically unlocked with the RKE transmitter or the door lock control switch while the driver door is open.Turn the ignition switch from OFF to RUN 8 times within 10 seconds, with the eighth turn ending in RUN. If the module has successfully entered program mode, it locks and then unlocks all the doors.Within 20 seconds, press any button on a RKE transmitter and the doors lock and then unlock to confirm that each remote transmitter has been programmed. Repeat this step for each RKE transmitter.If the door locks do not respond for any RKE transmitter, wait several seconds and press the button again. If the door locks still fail to respond, refer to Inspection and Verification. Make sure that no more than the maximum number of RKE transmitters are being programmed.Exiting the programming mode is accomplished if 1 of the following occurs:The key transitions to the OFF position.20 seconds have passed since entering programming mode or since the last RKE transmitter was programmed.The maximum number of RKE transmitters have been programmed. Let me know if you need anything further and please be sure to rate my service so I get credit for it. Thanks