How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask chris Your Own Question
chris
chris, Ford Mechanic
Category: Ford
Satisfied Customers: 3521
Experience:  ASE Master -Ford senior master-20 years experience
9504203
Type Your Ford Question Here...
chris is online now
A new question is answered every 9 seconds

My 2003 ford exploer passanger side window will not go down,

Customer Question

my 2003 ford exploer passanger side window will not go down, checked all switches found to be ok, window works if i cross wires on up and down switch.
Submitted: 1 year ago.
Category: Ford
Expert:  SuperDave replied 1 year ago.
Thank you for using just answer I will help you with your question.What wires are you crossing?
Customer: replied 1 year ago.
passenger side windowswitch only
Customer: replied 1 year ago.
passenger sidewindow switch wires only, when these wires are crossed the window will go down
Customer: replied 1 year ago.
(Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Customer: replied 1 year ago.
(Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  chris replied 1 year ago.
Hi there
-
access the right front power window switch , unplug it ,key on, then use a test lamp on these set of wires and see if it lights up
-
put a test lamp across these two wires -
red/light blue to the tan/light blue, should light up test lamp
-
then on these two wires
red/light blue to the white/yellow , should light up the test lamp
-
tell me what you get
-
Chris